2011

Origin of rotation Sets the point of rotation.
■ Rotation angle
■ Reference
Rotation angle Rotates the object about the selected axis the specified amount
from the current orientation.
Reference Specifies the reference angle and the new angle.
■ Reference (starting) angle. Sets the start point for the angle.
■ Ending angle. Sets the endpoint for the angle. The difference between the
starting angle and the ending angle is the computed rotation angle.
Face: Offset
Offset Offsets faces equally by a specified distance or through a specified point.
A positive value increases the size or volume of the solid. A negative value
decreases the size or volume of the solid.
■ Select faces (offset)
■ Undo
■ Remove
■ All
Select faces (offset) Specifies the faces you want to offset.
NOTE The size of holes inside a solid object that is offset decreases as the volume
of the solid increases.
■ Specify the offset distance. Sets a positive value to increase the size of the
solid or a negative value to decrease the size of the solid.
SOLIDEDIT | 1801