2011

■ Select a circle, ellipse, arc, 2D-spline, or 2D-polyline. Specifies the object
to use for alignment.
Surface Aligns the cutting plane with a surface.
■ Select a surface. Specifies a surface to be used for alignment.
NOTE You cannot select meshes created with the EDGESURF, REVSURF,
RULESURF, and TABSURF commands.
■
Point on desired side
■ Keep both sides
Z axis Defines the cutting plane by specifying a point on the plane and another
point on the Z axis (normal) of the plane.
SLICE | 1785