2011

(1), and ending at an endpoint (2). The direction is determined from the start
point.
Specify tangent direction for the start point of arc:
Radius Draws the minor arc counterclockwise from the start point (1) to the
endpoint (2). If the radius is negative, the major arc is drawn.
Specify radius of arc:
Center
Specifies the center of the circle of which the arc is a part.
Specify center point of arc:
Specify start point of arc:
Specify end point of arc or [Angle/chord Length]:
End Point Draws an arc counterclockwise from the start point (2) to an
endpoint that falls on an imaginary ray drawn from the center point (1)
through a specified point (3).
Angle Draws an arc counterclockwise from the start point (2) using a center
point (1) with a specified included angle. If the angle is negative, a clockwise
arc is drawn.
Specify included angle:
ARC | 133