2011

The base point options shown above are described in the TEXT command.
The base point options for single line text are similar to those for multiline
text except that the Align, Fit, and Left text options are equivalent to the
bottom left (BL) multiline text attachment point.
Specify new model height or [“Paper height”/“Match object”/“Scale
factor”]<0.5000>: Specify a text height or enter an option
NOTE You can only specify a model height for non- objects.
Paper Height
Scales the text height depending on the annotative property.
NOTE You can only specify a paper height for annotative objects.
Match Object
Scales the text objects that you originally selected to match the size of a selected
text object.
NOTE This option only affects like objects (annotative or nonannotative).
Scale Factor
Scales the selected text objects based on a reference length and a specified
new length.
Reference Scales the selected text objects relative to a reference length and a
new length.
The selected text is scaled by a ratio of the values that you entered for the new
length and the reference length. If the new length is less than the reference
length, the selected text objects are reduced in size.
SCRIPT
Quick Reference
See also:
■ Overview of Command Scripts
Executes a sequence of commands from a script file.
SCRIPT | 1699