2011

Ribbon: Annotate tab ➤ Annotation Scaling panel ➤ Scale List
Menu: Format ➤ Scale List
Command entry: scalelistedit (or 'scalelistedit for transparent use)
List of Options
The following options are displayed.
Scale Name
Lists the name of the currently selected scale in the Scale List area.
NOTE You cannot change the name of a scale that is referenced by an xref.
Name Appearing in Scale List Enter a descriptive or numeric name. For
example, in an architectural drawing that uses a typical imperial scale, you
can enter either 1"=4' or 1:48.
Scale Properties
Modifies the ratio of paper units to drawing units.
NOTE You cannot change the scale properties of a scale that is referenced by an
object in the drawing.
Paper Units When combined with the value of the drawing units, determines
the ratio that defines the scale for viewing or plotting.
Drawing Units When combined with the value of the paper units, determines
the ratio that defines the scale for viewing or plotting.
-SCALELISTEDIT
Quick Reference
See also:
■ Scale Views in Layout Viewports
List of Prompts
The following prompts are displayed.
Enter option [?/Add/Delete/Reset/Exit] <Add>: Enter an option or press Enter
? Displays a list of defined scales.
-SCALELISTEDIT | 1697