2011

List of Options
The following options are available.
Select object to analyze
Prompts you to select the surface objects to analyze. When you are done
selecting objects, press Enter to return to the Analysis Options dialog box.
Color Mapping
Maps green to the highest draft angle, red to the medium draft angle, and
blue to the lowest draft angle.
Angle Sets the value for the high and low draft angles. The draft angle is the
angle in degrees between the surface normal and the UCS plane.
Enter a value for the highest angle allowed (
VSADRAFTANGLEHIGH on page
2586). When the object’s angle reaches this value, it displays in green.
Displays the average value of the high and low angles. When the object’s angle
reaches this value, it displays in red.
Enter a value for the lowest angle allowed (VSADRAFTANGLELOW on page
2586). When the object’s angle reaches this value, it displays in blue.
Clear Draft Angle Analysis
Removes the curvature analysis display from all objects in the current drawing.
ANALYSISZEBRA
Quick Reference
See also:
■ Analyze Surface Continuity with Zebra Analysis
Projects stripes onto a 3D model to analyze surface continuity.
Access Methods
Ribbon: Surface tab ➤ Analysis panel ➤ Draft
Summary
The way the stripes line up where two surfaces meet, helps analyze the
tangency and curvature of the intersection.
116 | Chapter 2 A Commands