2011

List of Options
The following options are displayed.
Select object to analyze
Prompts you to select the surface objects to analyze. When you are done
selecting objects, press Enter to return to the Analysis Options dialog box.
Color Mapping
Display Style
Specifies the display for color mapping (VSACURVATURETYPE on page 2585
system variable).
Enter the maximum curvature value (VSACURVATUREHIGH on page 2584 system
variable). When the surface curvature reaches this value, it displays as green.
Enter the minimum curvature value (
VSACURVATURELOW on page 2585 system
variable). When the surface curvature reaches this value, it displays as blue.
Auto Range
Calculates the curvature range so that 80% of the values are within the high
and low range (VSACURVATUREHIGH on page 2584 and VSACURVATURELOW
on page 2585 system variables).
Max Range
Calculates the maximum and minimum ranges of all objects selected for
curvature analysis (
VSACURVATUREHIGH on page 2584 and
VSACURVATURELOW on page 2585 system variables).
Clear Curvature Analysis
Removes the curvature analysis display from all objects in the current drawing.
Draft Angle Tab (Analysis Options Dialog Box)
Quick Reference
See also:
■ Analyze Surfaces
Changes the display settings for the ANALYSISDRAFT command.
Analysis Options Dialog Box | 115