2011

Table Of Contents

Changes the display settings for the ANALYSISZEBRA command.

List of Options

The following options are displayed.

Select Object to Analyze

Prompts you to select the surface objects to analyze. When you are done

selecting objects, press Enter to return to the Analysis Options dialog box.

Stripe Display

Stripe Direction

Specifies the display angle. (

VSAZEBRADIRECTION on page 2588) This option

is only available when Type is set to Cylinder. If you are using the Chrome

Ball type, change the stripe directions with the VSAZEBRADIRECTION on

page 2588 system variable.

Type

Sets analysis display type. (

VSAZEBRATYPE on page 2589)

Size

Sets the width of the zebra stripes. (VSAZEBRASIZE on page 2589)

Color 1

Sets the first color for zebra stripes. (VSAZEBRACOLOR1 on page 2587)

Color 2

Sets the second color for zebra stripes. (VSAZEBRACOLOR2 on page 2588)

Clear Zebra Analysis

Removes the zebra display from all objects in the current drawing.

Curvature Tab (Analysis Options Dialog Box)

Quick Reference