2011

layouts. Select Import to import page setups from another DWG file through
the Import Page Setups for Publishing dialog box (a standard file selection
dialog box).
You have the option to set the page setup for model space sheets to 3D DWF
or 3D DWFx. The 3D DWF option is not available for layout entries in the
sheet list.
Status Displays the status of the sheet when it is loaded to the list of sheets.
Show Details
Displays and hides the Selected Sheet Information and Selected Page Setup
Information areas.
Selected Sheet Details
Displays the following information about the selected page setup: plot device,
plot size, plot scale, and details.
Publish Options Information
Publish Options
Opens the
Publish Options dialog box, in which you can specify options for
publishing.
Publish Output
Number of Copies
Specifies the number of copies to publish. If the Publish to DWF, DWFx, or
PDF option is selected, the Number of Copies setting defaults to 1 and cannot
be changed. If a sheet's page setup specifies to plot to file, then the number
set in this option is ignored and a single plot file is created.
Precision Optimizes the dpi of DWF, DWFx, and PDF files for your field:
manufacturing, architecture or civil engineering. Or you can configure a
custom precision preset in the
Precision Presets Manager on page 755.
This setting overrides the dpi setting in the .PC3 driver. This option is grayed
out if no file type is selected in the Publish to: drop-down list.
NOTE The precision override is applied to all sheets in the list except model sheets
that are exported to 3D DWF.
Include Plot Stamp
Places a plot stamp on a specified corner of each drawing and logs it to a file.
The plot stamp data is specified in the Plot Stamp Dialog Box on page 1481.
1556 | Chapter 16 P Commands