2011

Inserts the point cloud based on the geographic data in the point cloud file
and the drawing file.
Lock Point Cloud
Controls whether an attached point cloud can be moved or rotated.
(POINTCLOUDLOCK on page 2459 system variable)
-POINTCLOUDATTACH
Quick Reference
See also:
■ Import 3D Point Cloud Files
Inserts an indexed point cloud (PCG or ISD) file into the current drawing from
the Command prompt.
List of Prompts
The following prompts are displayed.
Enter File Name of Point Cloud Specifies the full or relative path to the PCG
or ISD file, or the file name only. If you specify the file only, it must be located
in the same folder as the current drawing file.
Entering a tilde (~) displays the Select Point Cloud File dialog box, a
standard
file selection dialog box
on page 1295.
Insertion Point Specifies the insertion point (or base point) of the point
cloud.
Scale Factor Specifies the scale for the inserted point cloud.
Rotation Angle Specifies the rotation angle for the inserted point cloud in
the current UCS.
-POINTCLOUDATTACH | 1517