2011

Summary
Specifies the insertion point for the point cloud. The point cloud is inserted
at the specified coordinates, based on the location of the Insertion object snap.
If geographic location information exists in both the current drawing and the
point cloud file, then you can insert the file based on that data.
List of Options
The following options are displayed.
Name
Identifies the point cloud file attach.
Browse
Opens the Select Point Cloud dialog box, a
standard file selection dialog box
on page 1295.
Path Type
Full Path Uses the full path of the specified file, including the root folder and
all subfolders that contain the point cloud file.
Relative Path Uses the file path relative to the current drawing file to reference
the point cloud file. To use the relative path, the point cloud file must first
be saved.
No Path Uses only the file name of the point cloud file for referencing. The
file must be located in the same folder as the current drawing file.
Insertion Point
Specifies the insertion point (or base point) of the point cloud.
Scale
Specifies the scale for the inserted point cloud.
Specify On-Screen
Specifies the scale using the pointing device.
Rotation
Specifies the rotation angle for the inserted point cloud in the current UCS.
Specify On-Screen
Specifies the rotation angle using the pointing device.
Use Geographic Location
1516 | Chapter 16 P Commands