2011

DTR
Controls the Data Terminal Ready output pin. This sends a signal to the printer
or plotter on pin 20 of a 25-pin serial port or on pin 4 of a 9-pin serial port.
Disabled
Disables the DTR line when the device is opened.
Enabled
Enables the DTR line when the device is opened.
Handshake
Enables DTR handshaking.
PNGOUT
Quick Reference
See also:
■ Export Raster Files
Saves selected objects to a file in a Portable Network Graphics format.
Summary
The Create Raster File dialog box (a
standard file selection dialog box) is
displayed. Enter the file name in the dialog box.
List of Prompts
The following prompts are displayed.
Select objects or <all objects and viewports>: Press ENTER to select all objects
and viewports or use an object selection method and press ENTER
A Portable Network Graphics file is created that contains the objects you select.
The file reflects what is displayed on the screen. Light glyphs that are displayed
in the drawing appear in the new file, even if the Plot Glyph property of the
lights is set to No.
NOTE When the FILEDIA system variable is set to 0 (Off), prompts are displayed
at the Command prompt.
PNGOUT | 1511