2011

Specifies the baud rate, protocol, flow control, and hardware handshaking for
serial ports on plotters that support these settings.
NOTE The settings on your plotter must match the settings in the program or
you cannot plot.
Access Methods
Menu: File ➤ Plotter Manager
Command entry: plottermanager
List of Options
The following options are displayed.
Baud Rate
Specifies the baud rate. Use the fastest available baud rate.
Protocol
Displays the protocol settings available for your plotter. Use the protocol
recommended by your device manufacturer. For more information see the
documentation for your device.
Flow Control
Sets the flow control for your plotter. The default flow control setting is
XON/XOFF (software handshaking) for compatibility with previous versions
of the program. If you select Hardware handshaking, you can specify additional
settings in the
Advanced Settings for COM Port dialog box that correspond
to different pins on the RS232 connector.
Advanced Settings for COM Port Dialog Box
Quick Reference
See also:
■ Overview of Plotting
Specifies additional hardware handshaking settings for serial ports.
Advanced Settings for COM Port Dialog Box | 1509