2011

If you enter y, the current settings in the Page Setup dialog box are saved. If
you enter q, you are prompted for the shaded plotting quality and are given
the option of providing a custom dpi. Then you are prompted to save the
page setup with the added quality settings.
Enter shade plot quality
[Draft/Preview/Normal/pResentation/Maximum/Custom] <Normal>: Enter c
if you want to specify a dpi, or to use a preset dpi, specify a different quality option
Enter custom dpi <150>:
Save changes to page setup [Yes/No]? <No>:
Plot paper space first [Yes/No] <current>:
Paper space geometry is usually plotted before model space geometry. If you
enter n, the model space geometry is plotted first, and paper space geometry
is plotted last. This option is available only if you are plotting from a layout
tab.
Hide paperspace objects? [Yes/No] <No>:
Specifies whether the Hide operation applies to objects in the paper space
viewport. This option is available only from a layout tab.
Proceed with plot [Yes/No] <Y>:
PLOTSTAMP
Quick Reference
See also:
■ Set Options for Plotted Objects
Places a plot stamp on a specified corner of each drawing and logs it to a file.
Summary
The
Plot Stamp dialog box is displayed.
NOTE Plot stamp will always be drawn with pen number 7, or the highest
numbered available pen if the plotter doesn't hold seven pens. You must install a
suitable pen in that position. If you are using a non-pen (raster) device, color 7 is
always used for plot stamping.
1480 | Chapter 16 P Commands