2011

Device For each selection you make under Printer Name, the corresponding
device driver name is displayed in this column, as follows:
■ For a selected plotter or printer, this column displays the device driver
name stored in the plotter or printer's PC3 file.
■ For a selected PC3 file, this column displays the device driver name stored
in the PC3 file.
■ For a selection of None, this column displays no device name. No device
will be substituted for the missing printer specified in the PC3 file.
Status Area
Displays information about the selected plotter, printer, or PC3 file.
Update and Save PC3 File
Displays the name of the PC3 file that you are modifying for the current
layout. If you click OK without changing the name of the PC3 file, the existing
PC3 file is updated with the new printer name. If you change the name of the
PC3 file and click OK, a copy of the PC3 file is saved with the new printer
information.
-PLOT
Quick Reference
See also:
■ Overview of Plotting
Plots a drawing to a plotter, printer, or file in the command line.
If you enter -plot at the Command prompt, the following prompts are
displayed.
List of Prompts
The following prompts are displayed.
Detailed plot configuration [
Yes on page 1477/No on page 1476] <No>: Enter y or
n or press ENTER
No
Indicates that you do not want a detailed plot configuration for this plot.
1476 | Chapter 16 P Commands