2011

geometry is loaded into the drawing, including geometry specified to load
from a view.
View: ?—List Views
Displays a list of model space views available in the selected drawing. Enter a
view name.
Layers to Load Loads geometry from one or more layers into the current
drawing. To load geometry from multiple layers into the drawing, use a comma
between layer names. If no layer geometry is specified, no layer geometry is
loaded into the drawing, including geometry specified to load from a view.
?—List Layers A list of layer names available in the current drawing is
displayed. Enter one or more layer names. If no layer geometry is specified,
no layer geometry is loaded into the drawing, including geometry specified
to load from a view.
PARTIALOPEN
Quick Reference
See also:
■ Open Part of a Large Drawing (Partial Load)
Loads geometry and named objects from a selected view or layer into a
drawing.
Summary
NOTE It is recommended that you partially open a drawing by using OPEN and
choosing Partial Open in the Select File dialog box to display the
Partial Open
dialog box
.
When you are running a script and using PARTIALOPEN, FILEDIA can be set
to 0 or 1. When FILEDIA is set to 0 and you enter partialopen or -partialopen
at the Command prompt, the following prompts are displayed.
List of Prompts
The following prompts are displayed.
Enter name of drawing to open: Enter a drawing name and press Enter
1418 | Chapter 16 P Commands