2011

PARTIALOAD
Quick Reference
See also:
■ Open Part of a Large Drawing (Partial Load)
Loads additional geometry into a partially opened drawing.
Access Methods
Menu: File menu ➤ Partial Load
Summary
The
Partial Load dialog box is displayed. PARTIALOAD can be used only in a
partially open drawing. To partially open a drawing, use OPEN and choose
Partial Open in the Select File dialog box (a standard file selection dialog box).
Any information that is loaded into the file using PARTIALOAD cannot be
unloaded, not even with UNDO.
If you enter -partiaload at the Command prompt,
options are displayed.
Partial Load Dialog Box
Quick Reference
See also:
■ Open Part of a Large Drawing (Partial Load)
Displays the views and layers available for specifying additional geometry to
load into a partially open drawing.
1414 | Chapter 16 P Commands