2011

NOTE If the Layout option is specified in Plot Area, the layout is plotted at 1:1
regardless of the setting specified in Scale.
Fit to Paper
Scales the plot to fit within the selected paper size and displays the custom
scale factor in the Scale, Inch =, and Units boxes.
Scale
Defines the exact scale for the plot. Custom defines a user-defined scale. You
can create a custom scale by entering the number of inches (or millimeters)
equal to the number of drawing units.
NOTE You can modify the list of scales with SCALELISTEDIT.
Inch(es) =/mm =/Pixel(s) =
Specifies the number of inches, millimeters, or pixels equal to the specified
number of units.
Inch/mm/pixel
Specifies inches or mm for display of units in the Plot dialog box. The default
is based on the paper size and changes each time a new paper size is selected.
Pixel is available only when a raster output is selected.
Units
Specifies the number of units equal to the specified number of inches,
millimeters, or pixels.
Scale Lineweights
Scales lineweights in proportion to the plot scale. Lineweights normally specify
the linewidth of plotted objects and are plotted with the linewidth size
regardless of the plot scale.
Plot Style Table (Pen Assignments)
Sets the plot style table, edits the plot style table, or creates a new plot style
table.
Name (Unlabeled)
Displays the plot style table that is assigned to the current Model tab or layout
tab and provides a list of the currently available plot style tables.
If you select New, the Add Plot Style Table wizard is displayed, which you can
use to create a new plot style table. The wizard that is displayed is determined
by whether the current drawing is in color-dependent or named mode.
Page Setup Dialog Box | 1393