2011

Use AutoCAD 2011’s default drawing template file Designates acad.dwt as
the default drawing template file.
Use my existing drawing template file Designates the drawing template file
of your choosing.
Use the default drawing template file based on my industry and unit
format Specifies the default drawing template file based on the industry
selected on the Specify Industry page and a unit value of Imperial (Feet and
Inches) or Metric.
ORTHO
Quick Reference
See also:
■ Use Orthogonal Locking (Ortho Mode)
Constrains cursor movement to the horizontal or vertical direction.
Access Methods
Button
Toolbar: Status bar ➤ Ortho
Command entry: 'ortho for transparent use
Summary
In the illustration, a line is drawn using Ortho mode. Point 1 is the first point
specified, and point 2 is the position of the cursor when the second point is
specified.
ORTHO | 1379