2011

loaded. Xref-dependent layers are displayed in the Layer Geometry to Load
list only if the selected drawing was last saved with theVISRETAIN system
variable set to 1. Any layers created in the xref since the xref was loaded into
the selected drawing are not displayed in the Layer Geometry to Load list.
You can use the PARTIALOAD command to load additional geometry into a
partially open drawing.
NOTE When a drawing is partially open, named objects are still loaded into the
file along with the specified geometry from the selected layers. All layers are still
available in the partially open drawing, but only geometry from the layers specified
to load appears in the drawing.
Layer Name Displays the layer names in the selected drawing.
Load Geometry Loads geometry from the layer when the drawing is opened.
Load All
Loads geometry from all layers when the drawing is opened. You can right-click
and use the shortcut menu to load geometry from all layers into the drawing.
Clear All
Loads no geometry from any layer when the drawing is opened. No geometry
at all is loaded, including geometry specified to load from a view. You can
right-click and use the shortcut menu to load no geometry into the drawing.
Index Status
Displays whether the selected drawing file contains a spatial or layer index.
INDEXCTL controls whether layer and spatial indexes are saved with the
drawing file.
Use Spatial Index
Controls whether a spatial index is used when partially opening a drawing.
A spatial index can be used to locate what portion of the drawing is read; this
minimizes the time required to open the drawing.
Spatial Index
Displays whether the selected drawing file contains an index that organizes
objects based on their location in space.
Layer Index
Displays whether the selected drawing file contains a list of the objects that
are on each layer. A layer index can be used to locate what portion of the
drawing is read; this minimizes the time required to open the drawing.
Partial Open Dialog Box | 1311