2011

Left, Center, Right, Justified and Distributed Sets the justification and
alignment for the left, center, or right text boundaries of the current or selected
paragraph. Spaces entered at the end of a line are included and affect the
justification of a line.
Line Spacing Displays suggested line spacing options or the Paragraph dialog
box. Line spacing is set in the current or selected paragraph.
NOTE Line spacing is the distance between the bottom of the upper line and the
top of the lower line of text in a multiple line paragraph.
The predefined options are:
■ 1.0x, 1.5x, 2.0x, or 2.5x: Sets the line spacing at .5x increments in multiline
text.
■ More: Displays the Paragraph dialog box, which provides additional options.
■ Clear Paragraph Spacing: Removes line spacing settings from the selected or
current paragraph. The paragraph defaults to the mtext space setting.
Additional options in the Paragraph dialog box:
■ Exact: Defines the space with an arbitrary unit value the user specifies.
Changing text height will not affect line spacing.
■ Multiple: Instead of assigning a value to line spacing, you specify spacing
according to text height. When text height is not consistent in one line,
the line space will be determined by the largest text height value in that
line.
■ At least: Takes both the user specified arbitrary value and the text height
to determine spacing. If text height is smaller than the arbitrary value the
line space is determined by the user specified value. If the text height is
larger, the line spacing is equal to the text height value.
NOTE Not all of the new options for paragraph and paragraph line spacing are
supported in releases before AutoCAD 2008. See MTEXT Paragraph and Paragraph
Line Spacing in Previous Releases.
Numbering Displays the bullet and numbering menu.
Displays options for creating lists. (Not available for table cells.) The list is
indented to align with the first selected paragraph.
■ Off: When selected, removes letters, numbers, and bullets from selected
text that has list formatting applied. Indentation is not changed.
In-Place Text Editor | 1225