2011

Summary
The Lights in Model window on page 1038 closes.
LIMITS
Quick Reference
See also:
■ Adjust Grid and Grid Snap
Sets and controls the limits of the grid display in the current Model or layout
tab.
Access Methods
Menu: Format ➤ Drawing Limits
Command entry: 'limits for transparent use
List of Prompts
The following prompts are displayed.
Specify lower left corneror [ON/OFF] <current>: Specify a point, enter on or off,
or press Enter
Lower-Left Corner Specifies the lower-left corner for the grid limits.
On Turns on limits checking. When limits checking is on, you cannot enter
points outside the grid limits. Because limits checking tests only points that
you enter, portions of objects such as circles can extend outside the grid limits.
1040 | Chapter 12 L Commands