2011

Table Of Contents

Layout names must be unique. Layout names can be up to 255 characters long

and are not case sensitive. Only the first 31 characters are displayed on the

tab.

Template Creates a new layout tab based on an existing layout in a template

(DWT), drawing (DWG), or drawing interchange (DXF) file. If theFILEDIA

system variable is set to 1, a

standard file selection dialog box is displayed for

selecting a DWT, DWG, or DXF file. After you select a file, the Insert Layouts

dialog box is displayed, which lists the layouts saved in the selected file. After

you select a layout, the layout and all objects from the specified template or

drawing file are inserted into the current drawing.

Rename Renames a layout. The last current layout is used as the default for

the layout to rename.

Layout names must be unique. Layout names can be up to 255 characters long

and are not case sensitive. Only the first 31 characters are displayed on the

tab.

Saveas Saves a layout as a drawing template(DWT) file without saving any

unreferenced symbol table and block definition information. You can then

use the template to create new layouts in your drawings without having to

eliminate unnecessary information. See “Reuse Layouts and Layout Settings”

in the User's Guide.

The last current layout is used as the default for the layout to save as a template.

If theFILEDIA system variable is set to 1, a standard file selection dialog box

is displayed in which you can specify the template file in which to save the

layout. The default layout template directory is specified in the

Options dialog

box

Set Makes a layout current.

?—List Layouts Lists all the layouts defined in the drawing.

LAYOUTWIZARD

Quick Reference