2011

Access Methods
Button
Ribbon: Home tab ➤ Layers panel ➤ Layer Properties Manager
Menu: Format ➤ Layer
Toolbar: Layer
Command entry: layer (or 'layer for transparent use)
Summary
Click on the
Layer Properties Manager on page 967.
Controls when notification occurs for new layers and if layer filters are applied
to the Layers toolbar; also controls the background color of viewport overrides
in the Layer Properties Manager.
List of Options
The following options are displayed.
New Layer Notification
Controls the evaluation and notification of new layers based on the
LAYEREVAL settings in the DWG file.
NOTE There should be no filter (Unreconciled Layer filter) displayed when
LAYEREVALCTL = 0. If one is currently displayed, it will be turned off. You can set
the unreconciled new layers filter active and select the layers in that filter. With
the unreconciled layer selected, you can right-click and click Reconcile Layer.
Evaluate New Layers Added to Drawing
Checks for new layers that have been added to the drawing. (LAYEREVAL =
0)
Evaluate New Xref Layers Only
Checks for new layers that have been added to attached xrefs. (LAYEREVAL
= 1)
Evaluate All New Layers
Checks for new layers that have been added to the drawing, including new
layers added to attached xrefs. (LAYEREVAL = 2)
986 | Chapter 12 L Commands