2011

List of Prompts
The following prompts are displayed.
Select source object: Select a line, polyline, 3D polyline, arc, elliptical arc, spline, or
helix
Depending on the source object selected, one of the following prompts is
displayed:
Line The line objects must be collinear (lying on the same infinite line), but
can have gaps between them.
Polyline The objects can be lines, polylines, or arcs. The objects cannot have
gaps between them, and must lie on the same plane parallel to the UCS XY
plane.
3D Polyline The 3D polyline and other objects must be contiguous (lying
end-to-end), but they can be lying in different planes. The resulting object is
a single 3D polyline.
Arc The arc objects must lie on the same imaginary circle, but can have gaps
between them. The Close option converts the source arc into a circle.
NOTE When joining two or more arcs, the arcs are joined counterclockwise
beginning from the source object.
Elliptical Arc The elliptical arcs must lie on the same ellipse, but can have
gaps between them. The Close option closes the source elliptical arc into a
complete ellipse.
NOTE When joining two or more elliptical arcs, the elliptical arcs are joined
counterclockwise beginning from the source object.
Spline The spline and other objects must be contiguous (lying end-to-end),
but they can be lying in different planes. The resulting object is a single spline.
960 | Chapter 11 J Commands