2011

Table Of Contents

AcadJobs/3d_dwgs. If that directory is set up as the current directory, you could

copy the acad.rx file into that directory and modify it in the following manner:

myapp1

otherapp

If you place this new acad.rx file in the AcadJobs/3d_dwgs directory and you

start AutoCAD with that as the current directory, these new ObjectARX

programs are then loaded and are available from the AutoCAD command

prompt. Because the original acad.rx file is still in the directory with the

AutoCAD program files, the default acad.rx file will be loaded if you start

AutoCAD from another directory that does not contain an acad.rx file.

You can load ObjectARX programs from an MNL file using the arxload

function. This ensures that an ObjectARX program, required for proper

operation of a menu, will be loaded when the menu file is loaded.

You can also autoload many ObjectARX-defined AutoCAD commands. See

Overview of AutoLISP Automatic Loading on page 440 and autoarxload in the

AutoLISP Reference in the Help system. To display Developer Help, on the

InfoCenter toolbar, to the right of the Help button, click the drop-down arrow.

From the menu, click Additional Resources ➤ Developer Help.