2004

Set Up a Page for Plotting | 617
4 Choose OK.
The layout reflects the changes.
Layouts toolbar
Command line
PAGESETUP
To set the default paper size for a plotter
1 From the File menu, choose Page Setup.
2 In the Page Setup dialog box, Plot Device tab, choose Properties.
The Plotter Configuration Editor is displayed.
3 To specify a default paper size, use one of the following methods:
■ For a nonsystem plotter, under Media, select Source and Size.
■ For a system printer, in the tree view, select Custom Properties. Then
under Access Custom Dialog, choose Custom Properties.
4 Select the appropriate paper size.
5 Choose OK to exit each dialog box.
Note The available paper sizes depend on the printer or plotter. Some plotter
manufacturers may control paper size differently in the Plotter Configuration
Editor.
Layouts toolbar
Command line
PAGESETUP
To create or edit a custom paper size for a nonsystem printer
1 From the File menu, choose Plotter Manager.
2 In the Plotter Manager, double-click the PC3 file whose configuration you
want to change.
3 In the Plotter Configuration Editor, Device and Document Settings tab,
under the User Defined Paper Sizes & Calibration, select Custom Paper
Sizes.