2004

Set Up a Layout | 573
See Also
“Control PC3 File Device and Document Settings” in the Driver and Peripheral
Guide
To start the Plotter Configuration Editor
1 From the File menu, choose Plotter Manager.
2 In the Plotter Manager, double-click the plotter configuration (PC3) file
you want to edit.
The Plotter Configuration Editor is displayed.
Command line
PAGESETUP
To set the paper size for a layout
1 From the File menu, choose Page Setup.
2 In the Page Setup dialog box, choose the Layout Settings tab.
3 Under Paper Size and Paper Units, select a paper option from the Paper
Size list.
4 Choose OK.
Layouts toolbar
Command line
PAGESETUP
Shortcut menu Right-click a layout tab and choose Page Setup.
To add a custom paper size from scratch
1 From the File menu, choose Plotter Manager.
2 In the Plotter Manager, double-click the plotter configuration (PC3) file
you want to edit.
3 In the Plotter Configuration Editor, choose the Device and Document
Settings tab.
4 Double-click User-Defined Paper Sizes & Calibration to display the calibra-
tion and paper size options.
5 Select Custom Paper Sizes.
6 Under Custom Paper Sizes, choose Add.
7 In the Custom Paper Size wizard, on the Begin screen, select Start from
Scratch. Choose Next.