2004

Table Of Contents
Work in Paper Space and Model Space | 569
To select all layouts
Right-click any layout tab and choose Select All Layouts from the shortcut
menu.
Command line
LAYOUT
To run page setup for the current layout
Right-click the current layout tab and choose Page Setup from the shortcut
menu.
Layouts toolbar
Command line
PAGESETUP
To plot a layout
1 Click the layout tabs that you want to plot. Hold down SHIFT to select
more than one.
2 Right-click a layout tab and choose Plot from the shortcut menu.
3 Choose OK to plot the drawing with the new settings.
Standard toolbar
Command line
PLOT
Work in Paper Space and Model Space
You typically design your drawing in model space and prepare it for plotting
in paper space. The environment you use to lay out and prepare your draw-
ing for plotting is a close visual representation of the final plot. At the bottom
of the drawing window there is one Model tab and one or more layout tabs.
Model space can be accessed on the Model tab by making a viewport on a lay-
out tab current, or by entering model on the command line. The Model tab
is where you spend most of your time creating and editing your drawing.
When you are on the Model tab, you are always working in model space. If
your drawing does not require plotting multiple viewports, you can plot your
drawing from the Model tab.