2004

Table Of Contents
Modify Objects | 407
3 Select the second line.
Modify toolbar
Command line
CHAMFER
To chamfer by specifying chamfer length and angle
1 From the Modify menu, choose Chamfer.
2 Enter a (Angle).
3 Enter the distance from the corner to be chamfered along the first line.
4 Enter the chamfer angle.
5 Select the first line. Then select the second line.
Modify toolbar
Command line
CHAMFER
To chamfer without trimming
1 From the Modify menu, choose Chamfer.
2 Enter t (Trim Control).
3 Enter n (No Trim).
4 Select the objects to chamfer.
Modify toolbar
Command line
CHAMFER
To chamfer an entire polyline
1 From the Modify menu, choose Chamfer.
2 Enter p (Polyline).
3 Select the polyline.
The polyline is chamfered using the current chamfer method and the
default distances.
Modify toolbar
Command line
CHAMFER