2004

Table Of Contents
278 | Chapter 16 Draw Geometric Objects
To draw an arc by specifying three points
1 From the Draw menu, choose Arc 3 Points.
2 Specify the start point.
3 Specify a point on the arc.
4 Specify the endpoint.
Draw toolbar
Command line
ARC
To draw an arc using a start point, a center point, and an endpoint
1 From the Draw menu, choose Arc Start, Center, End.
2 Specify a start point.
3 Specify the center point.
4 Specify the endpoint.
Draw toolbar
Command line
ARC
To continue an arc with a tangential line
1 Complete the arc.
2 From the Draw menu, choose Line.
3 Press
ENTER at the first prompt.
4 Enter the length of the line and press
ENTER.
Draw toolbar
Command line
LINE
To continue an arc with a tangential arc
1 Complete the arc.
2 From the Draw menu, choose Arc Continue.
3 Specify the second endpoint of the tangent arc.
Draw toolbar
Command line
ARC