2004

150 | Chapter 12 Specify a 3D View
To change the camera and target locations
1 On the command line, enter camera.
The current camera and target positions are displayed.
2 To set the camera location, use the pointing device or enter X,Y,Z
coordinate values.
3 To set the target location, use the pointing device or enter X,Y,Z
coordinate values.
Command line
CAMERA
To adjust the camera distance in the 3D Orbit view
1 From the View menu, choose 3D Orbit.
2 Right-click in the drawing area, and choose More ➤ Adjust Distance from
the shortcut menu.
The cursor changes to a line with one arrow pointing up and one pointing
down.
3 Click and drag toward the top of the screen to move the camera closer to
the objects. Click and drag toward the bottom of the screen to move the
camera away from the objects.
Adjust Distance simulates the effect of moving the camera closer to the
objects or farther away.
Command line
3DDISTANCE
plan view
camera at A
camera at B