2004

Table Of Contents
Define Standards | 113
4 (Optional) Repeat steps 2 and 3 if you want to associate additional
standards files with the current drawing.
5 Click OK.
CAD Standards toolbar
To remove a standards file from the current drawing
1 At the Command prompt, enter standards.
2 In the Configure Standards dialog box, Standards tab, select a standards
file in Standards Files Associated with the Current Drawing.
3 Click the X button (Remove Standards File).
4 (Optional) Repeat steps 2 and 3 if you want to remove additional
standards files.
5 Click OK.
CAD Standards toolbar
To change the order of standards files associated with the current drawing
1 At the Command prompt, enter standards.
2 In the Configure Standards dialog box, Standards tab, select the standards
file whose position you want to change in Standards Files Associated with
the Current Drawing.
3 Do one of the following:
Click the up arrow button (Move Up) to move the standards file up one
position in the list.
Click the down arrow button (Move Down) to move the standards file
down one position in the list.
4 (Optional) Repeat steps 2 and 3 if you want to change the position of
other standards files in the list.
5 Click OK.
CAD Standards toolbar