2011

To add a block to be used for sheet view callouts
1 Click View tab ➤ Palettes panel ➤ Sheet Set Manager.
2 In the Sheet Set Manager, open a sheet set.
3 On the Sheet Views tab, right-click the sheet set node.
4 In the Sheet Set Properties dialog box, click Callout Blocks. Click the [...]
button.
5 In the List of Blocks dialog box, do one of the following:
■ Click a block from the list of blocks.
■ Click the Add button and specify a new block to be added to the list.
6 Click OK to close each dialog box.
To change the default block used for sheet view labels
1 Click View tab ➤ Palettes panel ➤ Sheet Set Manager.
2 In the Sheet Set Manager, open a sheet set.
3 On the Sheet Views tab, right-click the sheet set node.
4 In the Sheet Set Properties dialog box, click Label Block for Views. Click
the [...] button.
5 In the Select Block dialog box, specify a new block to be used as the default
view label block.
6 Click OK to close each dialog box.
To add a callout block to a sheet
1 Click View tab ➤ Palettes panel ➤ Sheet Set Manager.
2 In the Sheet Set Manager, open a sheet set.
3 On the Sheet Views tab, right-click the view with which you want to
associate a callout. Click Place Callout Block.
4 Specify the insertion point of the callout block.
Create and Modify Sheets | 449