2011

NOTE Alternatively, you can enter lightingunits at the command prompt
and set the value to 0 for standard (generic) lighting.
2 Click Render tab ➤ Sun & Location panel ➤
➤ Sun Properties.
3 In the General settings, click the Intensity Factor setting, and select a
new value.
To change the geographic location of your model
1 Click Render tab ➤ Sun & Location panel ➤ Set Location.
2 In the Location Already Exists task dialog box, click Edit Current
Geographic Location.
3 In the Geographic Location dialog box, enter the appropriate values.
4 Click OK.
To change the angle of the sun
1 Click Render tab ➤ Sun & Location panel ➤
➤ Sun Properties.
2 In the Sun Angle Calculator settings, click the Date setting, and select a
new date.
3 Click the Time setting, and select a new time.
Use the Daylight Saving setting if necessary.
To change the color of the sun
1 Click Render tab ➤ Sun & Location panel ➤
➤ Sun Properties.
2 In the General settings, click the Color setting, and select a color.
Click Select Color to open the Select Color dialog box.
To create a new view with the sun and sky background
1 At the command prompt, enter lightingunits and set the value to 1
(American units) or 2 (International SI units) for photometric lighting.
Sun and Sky Simulation | 2059