2011

3 Right-click the selection. Click Copy Selected Sheets.
The copied drawing sheets are added and highlighted at the end of the
sheet list. When a sheet is copied, its name is created by the addition of
-copy(n) at the end of the original sheet name.
For example, if you create one copy of a sheet called Plumbing, the copied
sheet is called Plumbing-Copy(1).
Each time you copy the same sheet, the n is incremented by 1. By creating
copies of a sheet, you can have different page setups and other settings
for the same sheet.
To change the page setup of one or more sheets in a drawing set for
publishing
1 Click Output tab ➤ Publish panel ➤ Publish.
2 In the Publish dialog box, ensure the sheets for which you want to change
the page setups are listed.
3 Select one or more sheets in the list.
4 Right-click the selection. Click Change Page Setup.
5 In the Page Setup list, select a page setup to apply to the drawing sheets.
NOTE Change the page setup for each layout depending on your desired
output. Model space page setups can only be applied to model space sheets;
paper space page setups can only be applied to paper space sheets.
To publish multiple layouts in a drawing
1 In the drawing area, click a layout tab that you want to publish.
2 Press and hold the Ctrl key, and then click the other layout tabs that you
want to publish.
3 Right-click one of the selected layout tabs. Click Publish Selected Layouts.
4 In the Publish dialog box, change any settings for the selected layouts.
5 Click Publish.
Create and Modify a Drawing Set for Publishing | 1627