2011

By default, every initialized layout has a page setup associated with it. You
can initialize a layout by clicking on its tab to activate the previously unused
layout. A layout does not contain any plot settings before initialization. A
layout must be initialized (its paper size can be defined in the page setup to
any size other than 0 x 0) before it can be published. Once initialized, layouts
can be drawn upon, published, and added to sheet sets as sheets (after the
drawing has been saved). You can apply a named page setup saved with one
layout to another layout. This creates a new page setup with the same settings
as the first one.
If you want the Page Setup Manager to be displayed each time you begin a
new drawing layout, select the Show Page Setup Manager for New Layouts
option on the Display tab in the Options dialog box. If you don't want a
viewport to be automatically created for each new layout, clear the Create
Viewport in New Layouts option on the Display tab in the Options dialog
box.
To modify the settings of a layout's page setup
1 Click the layout tab for which you want to modify the page setup settings.
2 Click Output tab ➤ Plot panel ➤ Page Setup Manager.
3 In the Page Setup Manager, Page Setups area, select the page setup that
you want to modify.
4 Click Modify.
5 In the Page Setup dialog box, modify the required settings. Click OK.
6 In the Page Setup Manager, click Close.
To apply a layout's named page setup to another layout
1 Click the layout tab to which you want to apply another layout's page
setup settings.
2 Click Output tab ➤ Plot panel ➤ Page Setup Manager.
3 In the Page Setup Manager, Page Setups area, select a named page setup
that you want to apply to the layout selected in the drawing area.
4 Click Set Current.
Overview of Page Setup Settings | 1525