2011

block definitions create annotative block references. Annotative block
references and attributes initially support the current annotation scale at the
time they are inserted. You should insert annotative block references with a
unit factor of 1.
You cannot change the Annotative property of individual block references.
To set an annotative block’s paper size, you should define the block in paper
space or on the Model tab with the set to 1:1.
When creating and working with annotative blocks and annotative objects
within blocks, the following points should be noted:
■ Nonannotative blocks can contain annotative objects, which are scaled
by the block’s scale factor in addition to the annotation scale.
■ Annotative blocks cannot reside in annotative blocks.
■ Annotative block references are scaled uniformly by the current annotation
scale as well as any user scale applied to the block reference.
■ Blocks that contain annotative objects should not be manually scaled.
You can define annotative attributes for annotative and nonannotative blocks.
Use annotative attributes with nonannotative blocks when you want the
geometry in the block to display on the paper based on the scale of the
viewport, but you want the attribute text to display at the Paper Height defined
for the attribute.
Create Annotative Objects | 1247