2010

Where are my product manuals?
Documentation for AutoCAD Plant 3D is in two formats: PDF files and CHM
files.
■ PDF files are made available during installation; click the Documentation
link in the installer.
■ CHM files are available after the product is installed; they are accessed in
the Help system in the product.
The PDF files are also available from within your installed product’s Help
system.
Files are also installed to the \<AutoCAD Plant 3D>\Help folder.
How do I install the Specs and Catalogs Editor without
activating 3D Modeling?
You can install the AutoCAD Plant 3D Specs and Catalogs Editor without
activating the 3D modeling license.
On the Product and User Information page, enter the serial number
0000-00000000. You can operate 3D modeling in trial mode for 30 days from
the first time that you run 3D modeling.
License activation is not required to use the Specs and Catalogs editor.
Licensing Issues
This section outlines common issues and their solutions with regards to
software licenses and licensing your product(s).
What is the difference between a stand-alone license
and a network license?
Stand-alone licensed products are registered and activated to an individual
workstation. While the software can be installed on multiple systems in your
facility, the license only allows one system to be operational. If you need to
run more systems, you need to purchase more stand-alone licensed products,
or consider converting to network licenses.
26 | Chapter 2 Installation Troubleshooting