2010

Add or Remove Features
You can add or remove AutoCAD Plant 3D features at any time. For example,
you may have chosen a Custom installation option when you first installed
AutoCAD Plant 3D, but now you want to add features that you did not install
originally. Or you may no longer need to use all of the features that were
installed originally. You can add or remove features by using the Add or
Remove Programs dialog box.
To add or remove features
1 Do one of the following:
■ (Windows XP) Click Start menu ➤ Settings ➤ Control Panel ➤
Add or Remove Programs.
■ (Windows Vista) Click Start menu ➤ Control Panel ➤ Programs
and Features ➤ Uninstall or Change a Program.
2 In the Add or Remove Programs dialog box, click AutoCAD Plant 3D, and
then click Change/Remove.
The AutoCAD Plant 3D Installation wizard re-opens in Maintenance
Mode.
3 Click Add or Remove Features.
4 On the Add/Remove Features page, select a feature to install or uninstall.
The icons to the left of the selections give you an indication of the action
that will be taken.
Indicates a feature that was marked for installation will be in a typical
installation.
Indicates a feature that is not currently scheduled for installation.
Indicates a feature that was not originally marked for installation,
but was added to the installed feature list.
Indicates an installed feature that is chosen for removal.
NOTE If you need to revert to AutoCAD Plant 3D features that you selected
in your original installation, click Cancel.
Click Next.
5 On the Update AutoCAD Plant 3D Installation page, click Next.
Add or Remove Features | 19