2010

Choosing a Language
You can select a different language for installation instructions, and a language
for individual product installations in the same install process.
When you start the installation process, the installer automatically determines
your operating system language. If a supported language is detected, your
install pages are displayed in that language. If you want to change that
language, you select a different one from the installer language list on the first
page of the Installation wizard.
You can also select a language for an individual product by clicking the Select
Language for Individual Products check box on the Select the Products to
Install page, and then selecting a language from the drop-down list.
NOTE Some products may not have multiple languages available at the time of
product release. Additional language packs may be available later for Subscription
customers. Refer to http://autodesk.com/servicesandsupport for the availability of
additional language packs.
Configure Button
During the installation process, you choose either a typical installation (install
the product with default settings), or a customized installation. If you choose
to customize, you start that process in the Review - Configure - Install dialog
box. Select the appropriate product from the drop-down list, and click the
Configure button.
Choosing a Language | 7