AutoCAD Mechanical 2012 Installation FAQ
©2011 Autodesk, Inc. All Rights Reserved. Except as otherwise permitted by Autodesk, Inc., this publication, or parts thereof, may not be reproduced in any form, by any method, for any purpose. Certain materials included in this publication are reprinted with the permission of the copyright holder. Trademarks The following are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and other countries: 3DEC (design/logo), 3December, 3December.
Contents Chapter 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Installation Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Chapter 2 Installing AutoCAD Mechanical on a Single Computer . . . . . . 5 How can I prepare for a successful installation? . . . . . . . . . . . . . . 5 How can I choose the language in which the Installer instructions are presented? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
What features can I customize? . . . . . . . . . . . . . . . . . . . . . 10 Chapter 3 Creating a deployment to multiple computers . . . . . . . . . . 13 How can I prepare to create a successful deployment to multiple computers? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . How do I select a license type? What is the difference between a stand-alone license and a network license? . . . . . . . . . . . . How can I choose the language in which the Installer instructions are presented? . . . . . .
AutoCAD Mechanical 2012 System Requirements for 32-bit Workstations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 AutoCAD Mechanical 2012 System Requirements for 64-bit Workstations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Requirements for GPO (Group Policy Objects) Deployments . . . . . .
vi
Introduction 1 Installation Overview The process of installing or deploying AutoCAD Mechanical 2012 consists of the three main steps shown in the diagram above. ■ Preparation is very important for achieving a trouble-free and successful installation. ■ Entering Information varies depending upon the kind of installation or deployment you need. ■ Installation or Deployment executes quickly once you have made and specified your choices.
FAQ provided here. Note that complete details for creating deployments are provided in the Network Administrator's Guide. What kind of installation will you perform? Here are the four main installation types with a summary of the data and decisions they require: ■ Typical installation with default options. For a typical installation, begin with a proper preparation (page 5). Then, just click through the installer, providing your serial number (page 6), product key (page 6), and license information (page 7).
■ Custom deployment with selected options. For a custom deployment, in addition to the items listed above for a typical deployment, you will also specify: ■ Which of the additional bundled products (such as Autodesk Design Review) to install with AutoCAD Mechanical. ■ Which features (page 10) (such as Express Tools) to install with AutoCAD Mechanical. ■ Whether to install any available service packs (page 19) and whether to merge them with the deployment or append them.
4
Installing AutoCAD Mechanical on a Single Computer 2 How can I prepare for a successful installation? You can avoid problems and ensure a smooth installation of AutoCAD Mechanical by employing the following best practices: ■ Confirm that your computer meets the minimum System Requirements. (Click "System Requirements" at the bottom of the Installer window.) Important: Microsoft .NET Framework 4.0 (available on product disc) must be installed before you install AutoCAD Mechanical.
the Installer Launch page. Note that this will also set the language for your software, although later you can change that by selecting another language from the Product Language drop-down list on the Install > Configure & Begin Installation page of the Installer. How do I choose the language for my software? If other languages are available, you can choose the one you want to use within AutoCAD Mechanical.
How do I know if I have enough disk space for the installation? The Install > Configure & Begin Installation page of the Installer shows you how much disk space is required for your installation and how much disk space you have available. How do I select a license type? What is the difference between a stand-alone license and a network license? Choose the type of installation to deploy based on the type of software license you purchased: stand-alone license or network license.
What is the purpose of a client log file? A client log file contains detailed installation information for each workstation. This information may be useful in diagnosing any installation problems. The client log file is located in your Windows "Temp" folder. How do I register and activate my software after I have finished the installation? After you've installed your software, the easiest way to register and activate your software is with the Product License Activation wizard.
Where do I customize my installation? Click on the AutoCAD Mechanical band of the Install > Configure & Begin Installation page of the Installer to reveal the configuration area. Optional features are listed there, many of them pre-selected for installation. What are content libraries and how do I install them? AutoCAD Mechanical provides content libraries with hundreds of thousands of pre-drawn standard parts.
How can I be sure available service packs are included in my installation? You can include a service pack for your installation in the Service Pack section of the Installer configuration page. Three options are available: ■ Download the available service packs from Autodesk. ■ Install a service pack from your local network drive. ■ Do not install a service pack. If you select the option to download and apply a service pack from Autodesk, it will be downloaded automatically.
■ Express Tools: Productivity tools to extend AutoCAD functions for dimensioning, drawing, object selection, and object modification. These tools are not supported by Autodesk. ■ Fonts: AutoCAD fonts and TrueType® fonts. ■ Autodesk Content Explorer: Interface for quick browsing of DWG files on local and network drives and on Autodesk Seek. Note: In order to search network folders, the Autodesk Content Service utility must also be installed from the Tools & Utilities component of the Installer.
12
Creating a deployment to multiple computers 3 How can I prepare to create a successful deployment to multiple computers? You can avoid problems and ensure a smooth deployment of AutoCAD Mechanical by employing the following best practices. ■ Confirm that your network, servers, and client workstations meet the minimum System Requirements for AutoCAD Mechanical. (Click "System Requirements" at the bottom of the Installer.) Be sure that you have installed the .NET 4.0 Framework.
■ Before you create the deployment, exit all applications and turn off anti-virus programs. How do I select a license type? What is the difference between a stand-alone license and a network license? Choose the type of installation to deploy based on the type of software license you purchased: stand-alone license or network license. A product with a stand-alone license is registered and activated for an individual computer.
What is the benefit of a network licensed version of the software? With a network license, you can use the Network License Manager to install your software on more systems than the number of licenses you have purchased. At any one time, you can run the software on the maximum number of systems for which you have licenses. What is the purpose of a client log file? A client log file contains detailed installation information for each workstation.
What is an administrative image? An administrative image is a collection of shared file resources created during the deployment process and placed in the shared network deployment folder from which multiple workstations install the product. Where should the administrative image of my deployment be located? The administrative image for your deployment should be stored in a shared folder (a network share) you have created before you launch the deployment.
What are the additional products available for installation? The following additional products are available to install: ■ Autodesk Design Review — Allows users to review, measure, redline, and annotate DWG, DWF, and DXFx files without the original Autodesk creation software.
Here are the features available when you install AutoCAD Mechanical: ■ Model Documentation: Interface for Autodesk Inventor Server, a programming component that allows you to open and query the geometry and feature information of an Autodesk Inventor part file or other imported models and to create the corresponding data within AutoCAD Mechanical. ■ Autodesk Inventor Link: Tool for linking Autodesk Inventor assembly (.iam) and part (.ipt) documents to .dwg files.
How can I install medium resolution Material Library images? In addition to the Material Library images installed by default with AutoCAD Mechanical, you may also install the Medium Image Material Library if you plan to perform large renders or create close-ups of objects which require high quality textures. Installation takes place after you've installed AutoCAD Mechanical.
If you choose to install content libraries, you select the libraries for those country standards you need. If later, after installation, you want to add or remove content libraries, you do this by launching the Installer in maintenance mode and choosing Add or Remove Features to select the standard content libraries you require. To launch the Installer in maintenance mode, navigate from Windows Start to the control panel for adding, changing, and removing programs.
What is Autodesk Exchange? Autodesk Exchange is a new central portal for Help, learning aids, tips and tricks, videos, and downloadable apps. If you accept the User Preference default to display Autodesk Exchange at startup, you will have access to a dynamic selection of tools from the Autodesk community. How do I modify a deployment configuration? Once you have created a deployment, you can modify its configuration.
22
Maintaining and Reconfiguring Your Installation 4 How do I add or remove features after installation? To add or remove features from AutoCAD Mechanical, navigate from Windows Start to the control panel for adding, changing, and removing programs. When you select AutoCAD Mechanical as the program you want to change, the Installer will open in maintenance mode. Click Add or Remove Features and follow the instructions in the Installer.
panel for adding, changing, and removing programs. When you select AutoCAD Mechanical as the program to change, the Installer will open in maintenance mode. What if I accidentally delete or alter required files? Can I replace or repair them? You may be able to fix a problem that stems from a missing or altered support file by running the Installer to repair or reinstall AutoCAD Mechanical. To launch the Installer, navigate from Windows Start to the control panel for adding, changing, and removing programs.
What are the tools and utilities available for installation? You can install the following products from the Tools & Utilities section of the Installer. ■ Autodesk Network License Manager — Manages network licenses for your software by "checking out" and "checking in" licenses. ■ Autodesk CAD Manager Tools — Utility to allow CAD administrators to modify resource settings after a deployment is completed.
26
5 System Requirements AutoCAD Mechanical 2012 System Requirements Here are the minimum system requirements for both 32-bit and 64-bit operating systems. Recommended requirements: In addition to the minimum requirements, these system requirements also include recommended requirements for memory and graphics cards. The recommended operating system is Windows 7 (64-bit).
Service Pack 2 (SP2) or later of the following: ® ■ Microsoft Windows Vista Enterprise ■ Microsoft Windows Vista Business ■ Microsoft Windows Vista Ultimate ■ Microsoft Windows Vista Home Premium The following operating systems: ■ Microsoft Windows 7 Enterprise ■ Microsoft Windows 7 Ultimate ■ Microsoft Windows 7 Professional ■ Microsoft Windows 7 Home Premium ® Browser Internet Explorer 7.0 or later Processor Windows XP ® ® Intel Pentium 4 or AMD Athlon™ Dual Core, 1.
Additional requirements for 3D Modeling Intel Pentium 4 processor or AMD Athlon, 3.0 GHz or greater or Intel or AMD Dual Core processor, 2.0 GHz or greater 2 GB RAM 2 GB free hard disk available not including installation requirements 1280 x 1024 True color video display adapter with 128 MB (recommended: 256 MB for normal images and 512 MB for Medium Image Material Library images), Pixel Shader 3.0 or greater, Direct3D® capable workstation class graphics card.
® Browser Internet Explorer 7.0 or later Processor AMD Athlon 64 with SSE2 technology AMD Opteron™ with SSE2 technology ® Intel Xeon with Intel EM64T support and SSE2 Intel Pentium 4 with Intel EM64T support and SSE2 technology Memory 2 GB RAM (8 GB Recommended) Display resolution 1024x768 with True Color Disk Space Installation 3.1 GB Pointing Device MS-Mouse compliant Media (DVD) Download and Installation from DVD .NET Framework .NET Framework Version 4.
Requirements for GPO (Group Policy Objects) Deployments In addition to the minimum system requirements, addtional items are needed for a successful GPO deployment. See the Network Administrator's Guide for further information about GPO deployments. Available on the product disc Microsoft .NET 4.0 DirectX 9.
Microsoft Installer Package (MSI) 4.5 Microsoft Windows Media Format 9.
