2010
Table Of Contents
- Contents
- 1 Introduction
- 2 Get Familiar with the Work Area
- 3 Drawing Commands in AutoCAD Mechanical
- 4 Modify Drawings with Power Commands
- 5 Generate Standard Parts
- 6 Organize Objects with Layers
- 7 Create Hidden Lines
- 8 Reusable Detailing Tools
- 9 Power Dimensions
- 10 Add Part Lists and Balloons
- 11 International Drafting Standards
- Index
2 In the pane on the right, in the Standard elements list, Double-click BOM.
A dialog box with BOM settings for the active standard displays.
In the BOM Settings dialog box, you can add component properties from the
available component properties list to the four tabs: Component Properties,
BOM, Parts List, and Balloon. Select an entire row, and then click Add.
You can also add custom component properties to the Available component
properties list. To add a component property, double-click the last row and
enter your custom property.
Create Balloons
You use balloons in mechanical drawing to itemize the parts in an assembly.
Create Balloons
1 Open the gs_balloons drawing from the Getting_Started folder.
78 | Chapter 10 Add Part Lists and Balloons