2010
Table Of Contents
- Contents
- 1 Introduction
- 2 Get Familiar with the Work Area
- 3 Drawing Commands in AutoCAD Mechanical
- 4 Modify Drawings with Power Commands
- 5 Generate Standard Parts
- 6 Organize Objects with Layers
- 7 Create Hidden Lines
- 8 Reusable Detailing Tools
- 9 Power Dimensions
- 10 Add Part Lists and Balloons
- 11 International Drafting Standards
- Index
NOTE When adding the dimension, you can set its options, add tolerances,
and fits to the dimensions.
8 Press ENTER twice to reactivate the Power Dimensioning command to
create the 26-mm dimension.
9 Enter S to select the line for the 35-mm dimension. Enter O to open the
Power Dimensioning dialog box and create its tolerance.
10 If the 70-mm dimension overlaps the 52-mm dimension, a Dimension
Overdrawn dialog box appears. You can move the overlapping dimension
away from the other automatically.
11 Create all dimensions for the front view.
70 | Chapter 9 Power Dimensions