2010
Table Of Contents
- Contents
- 1 Introduction
- 2 Get Familiar with the Work Area
- 3 Drawing Commands in AutoCAD Mechanical
- 4 Modify Drawings with Power Commands
- 5 Generate Standard Parts
- 6 Organize Objects with Layers
- 7 Create Hidden Lines
- 8 Reusable Detailing Tools
- 9 Power Dimensions
- 10 Add Part Lists and Balloons
- 11 International Drafting Standards
- Index
1 Open the gs_dimensions drawing in the Getting_Started folder.
NOTE The path to the folder containing Getting_Started files is;
■ Windows Vista
®
:C:\Users\Public\Documents\Autodesk\ACADM
2010\Acadm\Getting_Started
■ Windows
®
XP: C:\Documents and Settings\All
Users\Documents\Autodesk\ACADM 2010\Acadm\Getting_
Started
2 Click Annotate tab ➤ Dimension panel ➤ Power Dimension .
3 Insert the 6-mm dimension for the flange of the part.
4 Locate the dimension line location. Click at the location when the
dimension line appears in red. This location is the preset dimension line
location from the geometry contour.
68 | Chapter 9 Power Dimensions