2010
Table Of Contents
- Contents
- 1 Introduction
- 2 Get Familiar with the Work Area
- 3 Drawing Commands in AutoCAD Mechanical
- 4 Modify Drawings with Power Commands
- 5 Generate Standard Parts
- 6 Organize Objects with Layers
- 7 Create Hidden Lines
- 8 Reusable Detailing Tools
- 9 Power Dimensions
- 10 Add Part Lists and Balloons
- 11 International Drafting Standards
- Index
9 Select the standard size - 3m6 x 12-A pin in the Select Part Size dialog
box.
The program inserts the cylindrical pin.
Edit Standard Parts
All standard parts and features in AutoCAD Mechanical are Power Objects.
You can modify them using Power Commands. AutoCAD Mechanical
automatically heals and cleans up affected areas after you modify an object
with a Power Command.
Erase the Pin
1 Right-click the drawing area to select Power Erase on the context menu.
2 Select the Pin to erase.
3 Press ENTER.
4 Notice that the pin hole on the bushing cleans up automatically and the
geometry heals itself.
5 Undo the previous step.
NOTE Do not use the Erase command from AutoCAD
®
on any Power Object.
Edit the Screw Components
1 Double-click the centerline of the screw components.
2 Select M 6 in the list.
3 Click Finish.
Notice that all screw components change to the new size.
Edit Standard Parts | 41