2010
Table Of Contents
- Contents
- 1 Introduction
- 2 Get Familiar with the Work Area
- 3 Drawing Commands in AutoCAD Mechanical
- 4 Modify Drawings with Power Commands
- 5 Generate Standard Parts
- 6 Organize Objects with Layers
- 7 Create Hidden Lines
- 8 Reusable Detailing Tools
- 9 Power Dimensions
- 10 Add Part Lists and Balloons
- 11 International Drafting Standards
- Index
Create Holes
1 Click Content tab ➤ Holes panel ➤ Through Hole to create a
through hole.
2 Scroll to the bottom of the Details list, and select User Through Holes.
3 Select Front View.
4 Place a through hole with the diameter 8 mm, as specified.
5 Click Home tab ➤ Modify panel ➤ Copy to create another similar
hole. The Power Copy command remembers the attributes of the Power
Object and creates another hole of the same size, symmetrical to the first
hole.
Use the Symmetry Power Snap selection in the Power Snap Settings dialog
box to create a hole symmetrical to the first hole. When prompts for an
insertion point, hold SHIFT and right-click to select in the context
menu to open the Power Snap Settings dialog box. Select the Symmetry
check box.
NOTE Click the check box Off for all other object snap settings.
Create Holes | 15