2009
Table Of Contents
- Contents
- 1 Introduction
- 2 Get Familiar with the Work Area
- 3 Drawing Commands in AutoCAD Mechanical
- 4 Modify Drawings with Power Commands
- 5 Generate Standard Parts
- 6 Organize Objects with Layers
- 7 Create Hidden Lines
- 8 Reusable Detailing Tools
- 9 Power Dimensions
- 10 Add Part Lists and Balloons
- 11 International Drafting Standards
- Index
4 Notice that the pin hole on the bushing cleans up automatically and the
geometry heals itself.
5 Undo the previous step.
NOTE Do not use the Erase command from AutoCAD
®
on any Power Object.
Edit the Screw Components
1 Double-click the centerline of the screw components.
2 Select M 6 in the list.
3 Click Finish.
Notice that all screw components change to the new size.
4
Select the other screw connection instances to change to size M 6.
Both screw components change to size M 6.
Projected Views of Standard Parts
You can generate the projected view of a standard part from its existing view
(parent view) using Power View command. Depending on the first-angle or
third-angle projection for the drawings your company uses, it prompts you
Projected Views of Standard Parts | 41