2009
Table Of Contents
- Contents
- 1 Introduction
- 2 Get Familiar with the Work Area
- 3 Drawing Commands in AutoCAD Mechanical
- 4 Modify Drawings with Power Commands
- 5 Generate Standard Parts
- 6 Organize Objects with Layers
- 7 Create Hidden Lines
- 8 Reusable Detailing Tools
- 9 Power Dimensions
- 10 Add Part Lists and Balloons
- 11 International Drafting Standards
- Index
9 The program creates the top view of the holes.
NOTE You can use Power View to create projected views of standard parts
such as screws, bolts, and nuts. It quickly creates a top view from a side view,
or a side view from a top view.
Create Countersink Holes
Countersink holes are Power Objects or mechanical objects. Use the
AMCOUNTS2D command to create a countersink hole. You can quickly change
the size of countersink holes by using the Power Edit command.
Create a Countersink Hole
1 From the Content menu, click Holes ➤ Countersinks
2 Create a countersink hole with nominal diameter 26 mm, countersink
diameter 35 mm, and angle 90 degrees.
3 Specify its insertion point as shown in the following image.
Create Countersink Holes | 17