2009
Table Of Contents
- Contents
- 1 Introduction
- 2 Get Familiar with the Work Area
- 3 Drawing Commands in AutoCAD Mechanical
- 4 Modify Drawings with Power Commands
- 5 Generate Standard Parts
- 6 Organize Objects with Layers
- 7 Create Hidden Lines
- 8 Reusable Detailing Tools
- 9 Power Dimensions
- 10 Add Part Lists and Balloons
- 11 International Drafting Standards
- Index
for the position of the side view using the AMCONSTVER command. See
the following image.
The program creates horizontal and vertical construction lines.
Create Holes
In AutoCAD, you create holes using Line, Circle, Trim, and Modify commands.
In AutoCAD Mechanical, the hole is a Power Object or mechanical object with
attributes or internal information. Use the AMTHOLE2D command to create
the hole.
Create Holes
1 From the Content menu, click Holes ➤ to create a through hole.
2 Scroll to the bottom of the Details list, and select User Through Holes.
3 Select Front View.
4 Place a through hole with the diameter 8 mm, as specified.
14 | Chapter 3 Drawing Commands in AutoCAD Mechanical